Roche ACCU-CHEK Inform II Manuale dell'Operatore

Inform IIQuick Reference Guidefor Healthcare ProfessionalsBLOOD GLUCOSE MONITORING SYSTEM

10Meter, Front ViewACCU-CHEK Inform II MeterTest Strip PortTouchscreenOn/Off Button

11Meter, Back ViewACCU-CHEK Inform II MeterACCU-CHEK Inform II MeterBarcode Scanner WindowBattery PackReset ButtonInfrared Window

12ACCU-CHEK Inform II MeterThe base unit:•Chargesthemeterbatterypack.•Communicateswithadatamanagement system, if available.Base Unit

13Patient TestingNote: Prior to testing, ask patient to wash hands with soap and water, then let dry. If patient is unable to wash hands, wipe with al

144. Touch Patient Test to display the Patient ID screen.How to Perform Patient Testing

155. Enter or barcode scan patient ID, then touch . You are prompted to confirm the test strip lot.Patient TestingHow to Perform Patient Testing

166. Verify the test strip lot.•If correct, touch . You are prompted to insert the test strip.•If incorrect, touch to select a different test str

177. Slide the test strip into the test strip port as far as it will go in the direction indicated by the arrows on the test strip.8. Wait until the

189. Apply the drop of blood to the front edge (yellow dosing area) of the test strip. Do not apply the blood to the top of the strip.Blood is pulled

1910. When the test is completed, the result is displayed. Touch to enter the desired comments. Touch to return to the Main Menu.How to Perform Pat

2

2011. Remove the test strip and dispose of it in accordance with applicable regulations and directives for disposal of potentially infectious samples

21Control TestingHow to Perform Control TestingGlucose control tests should be run in the following circumstances:•Before using the meter for the pat

22How to Perform Control Testing•If questionable test results are displayed repeatedly•If you wish to test the performance of the systemIn addition,

231. Press the On/Off button to power on the meter.2. Once the Power Up screen appears, touch to proceed to the Operator ID screen, or wait 5 sec

243. Enter or barcode scan operator ID, then touch to display the MainMenu screen.4. Touch Control Test to display the Control Test screen.How to

255. Touch the control level to be run.How to Perform Control TestingControl Testing

266. Verify the control lot number.•If correct, touch . You are prompted to confirm the test strip lot.•If incorrect, touch to enter or barcode

277. Verify the test strip lot.•If correct, touch . You are prompted to insert the test strip.•If incorrect, touch to select a different test st

288. Slide the test strip into the test strip port as far as it will go in the direction indicated by the arrows on the test strip.9. Wait until the

2910. Apply a drop of glucose control solution to the front edge (yellow dosing area) of the test strip. Do not apply the control solution to the top

3Table of ContentsImportant ... 4General Information ... 6ACCU-CHEK Inform II Met

3011. When the test is completed, the result is displayed. Touch to enter the desired comments. Touch to continue with the next level, if necessary

3112. Remove the test strip and dispose of it in accordance with applicable regulations and directives.How to Perform Control TestingControl Testing

321. Press the On/Off button to power on the meter.2. Once the Power Up screen appears, touch to proceed to the Operator ID screen, or wait 5 sec

33Storing Test Strip Lot Information4. Touch Strip Lots to open the related menu.5. Touch Add if you want to add the information for a new test strip

346. Insert the new code key in the opening of the code key reader. An LED starts flashing green and signals that the reader is ready to transfer dat

357. Hold the meter 4-6 in above the code key reader so that a connection can be made between the two infrared windows.8. Touch to begin downloadin

369. Confirm the test strip lot information.•Touch to store the data for this lot number without changes, or•Touch to modify the data for this te

37The meter does not power on.Solution: Confirm that the meter battery pack is charged correctly.The “QC Due: Immediately” message appears on the scre

05234654001 2012-10 USAACCU-CHEK, ACCU-CHEK INFORM, and COBAS are trademarks of Roche.©2012 Roche Diagnostics. All rights reserved. Roche Diagnostic

4WARNING: Protection against infection• Refer to the operator's manual for the proper cleaning and disinfection instructions for this system.•

5WARNING: Protection against infection (continued)• Do not dispose of the battery pack with normal domestic waste. As a component of the ACCU-CHEK In

6General Information• Refer to the ACCU-CHEK Inform II System Operator’s Manual and package inserts for detailed information. Be sure to read the “I

7General InformationYour system is ready to use when it has been charged in the base unit.Meters can be configured according to your institution’s nee

8QC Lockout occurs when •patient testing is attempted and controls have not been run in the time interval or frequency designated by your institutio

9ReagentsYou need the following reagents to perform patient tests and glucose control tests:•ACCU-CHEK Inform II Test Strips•ACCU-CHEK Inform II Con